Ideal expansion board to control up to 2 PWM-based DC motors Micro:bit connector, directly pluggable Multiple pins on board: ideal for connecting various sensors and modules Includes 3.3V and 5V voltage regulator chips
Expansion board designed to add Internet and WiFi functionalities to your micro:bit board, thanks to the integrated ESP8266 circuit Program the micro:bit to communicate with connected peripherals, or to the Internet: ideal for exploring new possibilities such as interactive project creation,...
IO expansion board ideal for associating 3.3V and 5V modules to your micro:bit board! External DC 6-12V power supply, with switch Includes a DIP switch Multiple pins
4x8 LED Matrix Module SK6812 Compatible with micro:bit, just clip your card into the shield The three primary colors of each pixel can realize 256 levels of brightness display, up to 16777216 types of colors: it is the assurance of brilliant and bright colors! Embedded x2 3.3V...
The board features an integrated battery holder, ideal for powering your Micro:bit for mobile projects x4 3-pin ports with 2.54 mm pitch for connecting various modules Features a servomotor control interface, enabling precise motion control for a variety of robotic applications Includes a...
Shield card with x4 Grove ports, ideal for simple connections and rapid prototyping Edge connector for easy clipping onto your Micro:bit card Slot for alligator clips and 4 mm banana plugs Integrated USB port for powering your micro:bit
The bit: LAMP has connections that allow the microbit to be bolted/clipped directly onto it. It was designed to replicate a street light, in form and function. This board is ideal for transportation projects and has been designed to match the same aesthetic as STOP: bit, so they can be used...
Honeycomb-shaped digital LED module Red color LED x6 annotated ports for easy operation Compatible with micro:bit card (alligator clip connection)
Servo motor for Micro:Bit with pins 0, 1, 2, 3V and GDN exploded (like the Micro:Bit board) and a specially designed output for the ZIP LEDs. Capable of driving 2 DC motors simultaneously, clockwise and counterclockwise Driver output status indicators AAA battery holder (x3) for power...
Detect light, objects and follow lines with the clip-on sensor card for the BBC bit microphone. Attach directly to Micro:bit or connect with alligator cables.
This is a color display module designed for the BBC micro: bit, 1.8" diagonal, 160x128 resolution, capable of displaying 65K colors. Tired of the 5x5 LED matrix? It's time to get a small monitor for your micro: bit, this one would be the perfect choice. Documentation
ACCESS: bit is a bolt-on/clip-on card for the BBC microbit that simulates an access gate. It includes a switch to turn on and off the built-in 3xAAA battery power, as well as an audible horn. The ACCESS: bit joins the micro: bit family of transport / crosswalk accessories, which also includes;...
Sonar: bit is an ultrasonic module with an operating voltage of 3-5V. It is available for use with a 3.3V or 5V microcontroller system. With a single 3-wire cable (GVS), it can work properly. Compared with the normal 4-wire ultrasonic module, it has saved one IO port. The measurement range of...
Expand the possibilities with a Micro:bit extension This extension board Micro:bit is designed to be installed vertically in order to adapt to your other products: robot, vehicles... Installing this extension allows you to improve the performances and thus to reach new possibilities: improved...
Sensor: bit is a card based on micro: bit. It extends all the IO ports available on micro: bit and extracted them as GVS. With this board we can extend various 3V electrical brick modules such as LED lamps, photocells, etc. The board has a built-in buzzer and an audio jack, which allows us to...
Speaker expansion module designed for micro:bit, turns your micro:bit into a music player easily! In addition, it can also be used for development Arduino, compatible with Arduino 3.3V / 5V cards. Documentation
This is an expansion board designed for micro: bit. It consists of a motherboard socket, 18650 battery socket, USB power interface, 3-5v external power interface, 4 programmable RGB lights, buzzer, I2C interface, WIFI camera serial port, motor interfaces of all kinds. It can also be connected...
Ring: bit is a kind of expansion board for micro: bit, which can open three IO ports: P0, P1, P2. It can connect up to 3 motors.
The BBC micro:bit card controller is a retro programmable gaming accessory for a better gaming experience on the micro:bit or other devices via a micro:bit radio. It features built-in sound, 4 directional buttons and 2 fire buttons. All these features are fully programmable. The board is powered...
The Breakout Board for micro:bit is the perfect match for your BBC micro:bit card! Simply plug in your card and you will find your micro:bit much more convenient to handle!
The Prong Soil Moisture Sensor for BBC microbit is a sensor card that can be mounted directly on a BBC microbit to monitor the moisture present in the soil. The two conductive prongs are placed in the soil. Any water or moisture in the soil will lead to an analog voltage readable by the BBC...
Basic: bit is a board for micro: bit which has a buzzer and three groups of GVS pins (P0 / P1 / P2). Each group of GVS pins drives the IO port, the 3V port and the GND port on micro: bit separately. Small size and simple structure, it will allow you to complete 98% of micro: bit projects.
Capture the world around you with enviro:bit! It has sensors for air and weather, color and light, and sound, and connects directly to your micro: bit. Just place your micro: bit, then code enviro:bit with the block-based Microsoft MakeCode editor, or with MicroPython in the Mu code editor. The...
Français
Español
Italiano
Deutsch
