3.97" color touchscreen with up to 5 simultaneous touch points and 800 x 480 pixel resolution Add a graphical interface to your projects, with easy connection via J5 and J6 headers Embeds a digital microphone, accelerometer/gyroscope circuit, etc. Compatible with 20-pin DVP...
Carrier IoT Rev2 expansion board compatible with all Arduino MKR microcontrollers Équiped with temperature, humidity, pressure and motion sensors thanks to the 6-axis IMU module and light, gesture and proximity sensors Expansion board that offers endless possibilities for IoT projects...
Want to connect multiple Seeed Studio Grove modules to your Arduino board? TheArduino MKR CONNECTOR CARRIER is the perfect companion to Arduino MKR cards and the Grove ecosystem.
The Arduino MKR RGB Shield puts 84 LEDs (12x7) at your service! Write messages and add graphics with this shield Very dense and bright LEDs with full RGB colors No need for soldering or adapters, just plug the RGB Shield into your favorite MKR board
Want to add serial communications to your device using the RS-485 protocol? The Arduino MKR 485 shield will provide the industrial connectivity you need.
ATmega328P microcontroller compatible Arduino Designed for learning programming languages 12 built-in LEDs functioning as outputs and indicators Possibility to keep the original box as a case
Learning platform with good visibility and easy connection of the elements and optimal handling Easy frame assembly: the beams are already cut and ready to use 100% compatible Arduino UNO, works with all Arduino and Arduino IDE Expand your platform with our many compatible Totem extensions!
TheArduino Ethernet Shield 2 allows you to connect your Arduino to the Internet.
Are you developing a complex IoT device with your MKR board and running out of memory? Add Flash memory and microSD storage to your MKR card and enable over-the-air updates with the Arduino MKR MEM shield.
Equipped with 4 sensors LPS22HB, HTS221, TEMT6000 and VEML6075 Measure: air pressure, temperature and humidity, ambient lux and UVA/UVB wavelengths Operates in temperatures from -40°C to +120°C MicroSD port to store all your environmental data on external storage
The MKR Motor Carrier is an expansion board designed to control servo, DC and stepper motors Also connect other actuators and sensors via a series of 3-pin male sockets Ideal board to easily connect multiple motors and modules to your mechatronics project! Quickly prototype and build your...
Shield designed for accurate and wide temperature measurements Thermocouple to digital converter ideal for accurate and wide temperature measurements Measure extreme temperatures: from -200°C to +700°C Type K female connector
Make your projects solid with the prototyping shield. It allows you to easily design custom circuits and solder electronics directly to them.
Simply mount your MKR1000 on this new adapter and plug in one of your UNO shields!
The MKR Relay Proto Shield allows you to easily control relays with your MKR board. The shield provides two integrated relays and a small prototyping area if you need to add another component to your project.
GSM antenna (850/900/1800/1900 MHz) which can be attached to the board with the micro UFL connector. Suitable for MKRFOX1200, MKR WAN and MKR GSM.
Arduino Motor Shield allows your arduino to drive DC and stepper motors, relays and solenoids.
Français
Español
Italiano
Deutsch
