RTC battery to power your Raspberry Pi 5's real-time clock when the main power supply is disconnected: ideal for an accurate time reference Panasonic ML-2020 lithium manganese dioxide battery, rechargeable with an estimated lifespan of around 6 months Easily connected to the "BAT" battery...
Versatile and universal charger with the best price-performance ratio Can charge one or two rechargeable Li-ion batteries of sizes 26650, 22650, 18650, 18500, 17670, 16340, 14500, etc. or one to two AA/AAA NiMH rechargeable batteries Equipped with a high quality charging system controlled by a...
18650 battery charger with2 x 5V 1A/2.1A USB outputs Motherboard equipped with overcharge, discharge and overcurrent protection Automatic charge stop to prevent overcharging of devices Equipped with an intelligent digital display screen
AAA battery holder (x2) with switch Designed specifically for use with the Micro: bit Connection cable JST-PH
RTC ML-2032 battery for precise time management, essential for many applications Battery capacity: 64mAh Provides protection against overvoltage, overcurrent, overheating, overload and short-circuiting JST 2PIN connector to connect to the "BAT" port of your Raspberry Pi 5 board
High capacity 20,000 mAh power bank 2 types of power inputs / recharge the battery via micro-USB and USB Type-C 2 types of power outputs / power your device via USB-A and USB Type-C Quick Charge Power Delivery 3.0 and Quick Charge 4.0 (22.5W)
Ideal for powering your DIY solution via solar energy Up to 220 mA in operation Less than 15 centimeters long Polycrystalline battery
Increase the power of your Raspberry The Li-ion HAT battery enhances the capabilities of your Raspberry with an additional 5V power supply. From a 14500 lithium battery, you can easily transport your Raspberry. This versatile module can also be used with other 5V devices.
AAA battery holder (x4) with switch and protective cover Holder size: 63mm X 48mm X 15mm Weight: 24g
Additional Lithium-Ion battery for Pi Juice HAT power supply Easily increase the capacity of your Pi Juice with up to 6 times more capacity Available in 3 versions : Zero - 600 mAh, 5 000 mAh, 12 000 mAh
This battery is an ideal UPS solution for the StromPi 3. This battery acts as a third power source and is monitored and automatically recharged. It is based on LiFePo4 technology and offers more advantages than standard Lithium-Ion systems: High safety, as automatic chemical ignition is not...
LilyPad battery holder card for your 20mm button batteries Includes a switch to easily turn off your project and save batteries Offers 4 connection points: two positive and two negative
This 3 x AAA battery holder with power leads that terminate in a JST connector. The wires are color coded and are 150mm long. The holder also has two mounting holes so the battery holder can be permanently mounted to a project or surface. This battery holder is ideal for any project that requires...
Choose the right equipment for Micro:bit The 2x AAA battery holder with JST connector is a necessary piece of equipment for your Micro:bit products. With the connector and its 145mm power cables, this holder can be attached to your product Micro:bit with its clips. Lightweight and fully...
The BBC MI: bit power board is an elegant way to power your BBC: bit microphone from a 3V button cell. A piezo buzzer is integrated and a battery is included. The MI: power board for the BBC micro: bit brings real portability to your portable projects. The sleek, lightweight board is designed to...
Model : Rechargeable battery AA 2800mAh 1.2V Technology : Alkaline Manganese, Zinc-Manganese dioxide Dimensions : 14,5 mm x 50.5mm
This tiny button cell holder is ideal for small portable projects. It holds two 20mm button cells (the most popular size is 2032) to generate a nominal 6V. The 20mm button batteries are popular because they are used in keychain lights, so they are easy to obtain and relatively inexpensive. They...
The four batteries are connected in series, for a nominal power of 6V DC. - ON/OFF switch to control the power supply - Battery type: AA- Includes a removable sliding cover- 12.70 cm tinned wire and square configuration
The PiJuice 12 watt solar panel is the perfect way to charge and/or power your PiJuice HAT and your Raspberry Pi for free when you are in a sunny place thanks to the revolutionary PiAnywhere technology! This solar panel exists in 4 versions, 6W, 12W, 22W, 40W
Increase the power of your projects using this battery holder capable of supplying 7.5V for conventional batteries and 6v for rechargeable batteries. The holder is terminated with bare wires so it can be directly soldered or connected to a screw terminal.
High capacity 3.7V lithium-ion battery with short circuit protection JST-PH connector 100mm cable Available in 4 versions: 3350 mAh, 6700 mAh, 10,050 mAh, 13,400 mAh
Français
Español
Italiano
Deutsch
