Carrier IoT Rev2 expansion board compatible with all Arduino MKR microcontrollers Équiped with temperature, humidity, pressure and motion sensors thanks to the 6-axis IMU module and light, gesture and proximity sensors Expansion board that offers endless possibilities for IoT projects...
Ideal expansion board to control up to 2 PWM-based DC motors Micro:bit connector, directly pluggable Multiple pins on board: ideal for connecting various sensors and modules Includes 3.3V and 5V voltage regulator chips
Expansion board designed to add Internet and WiFi functionalities to your micro:bit board, thanks to the integrated ESP8266 circuit Program the micro:bit to communicate with connected peripherals, or to the Internet: ideal for exploring new possibilities such as interactive project creation,...
IO development board for Raspberry Pi Pico Multiple communication ports: x2 I2C, x2 UART, 2 x SPI, x3 analog I/O and x13 digital I/O 6.5-12 V power supply interface Compatible with Lego extensions
ODROID H3 network interface card offers 4 additional 2.5 GbE Ethernet ports Compatible with H2, H2 rev. B, H2+, H3, H3+ When using an H2+ card, you get x6 2.5 GbE Ethernet ports With H2 and H2 rev. B cards, you get 2 x 1 GbE Ethernet ports and x4 x 2.5 GbE Ethernet ports...
GPS / RTC expansion card with multi-GNSS GPS receiver Featuring PPS output to enable card use on PPS-disciplined NTP servers, and RAW output available from the UBlox™ GPS module Compatible Raspberry Pi (via 2x20 GPIO header) Quick plug-n-play connection and no soldering required
Uninterruptible Power Supply (UPS) card to power your Raspberry Pi Compute Module 4 Enjoy stable, uninterrupted power Designed to allow you to work for long hours on your project with long battery life Offers a wide range of connectivity: x40 PIN GPIO, x4 USB, Gigabit Ethernet, x2 HDMI, M.2 M...
Mini Base-board to add the Raspberry Pi 4 ports to your Raspberry Pi Compute Module 4 Suitable for testing and using the Raspberry Pi CM4 or to be integrated into finished products thanks to its dimensions similar to those of the Raspberry Pi 4 GPIO Header Raspberry Pi 40PIN Color Coded...
IO expansion board ideal for associating 3.3V and 5V modules to your micro:bit board! External DC 6-12V power supply, with switch Includes a DIP switch Multiple pins
Expansion board for ODROID-M1S, allowing 4-channel relay control via GPIO pins GPIO isolation using a PC817 photocoupler to avoid interference from high-voltage circuitry. Single RS232 serial port Board reset and power button pins (optional)
TheArduino Ethernet Shield 2 allows you to connect your Arduino to the Internet.
I/O board featuring power button, reset button, USB 2.0 host port, 3.5 mm audio output X6 GPIO header pin for I2C and UART Compatible with ODROID-M1S board Simple connection via ODROID-M1S 14-pin header connector
Solar charger shield card designed to collect solar energy Power management and charging function Input voltage range of 3.0 to 4.5V DC (battery input), and 4.75 to 5.25V DC (USB input) and 4.8 to 5.5V DC (solar input) Includes one micro-USB port and x2 PH2.0 ports
Have a fun and creative learning experience with LEGO® and Raspberry Pi Raspberry Pi Build HAT add-on board with a Raspberry Pi RP2040 microcontroller designed in collaboration with LEGO® Education and compatible with all LEGO® models Raspberry Pi Control up to 4 LEGO® extensions such as...
This shield adds a USB Host port to your Arduino, to facilitate connections with a variety of USB devices (keyboards, mice, joysticks,...) Android SDK support, to easily integrate your Arduino project with Android devices, enabling seamless interaction between your creation and Android...
HAT network extension with antennas for Raspberry Pi (GPIO - 40 PIN) Support for 5G / 4G / 3G networks, Multi-Band / Multimode Based on Qualcomm Snapdragon X55 platform SIM card slot, supports 1.8 V / 3 V SIM card
Maker HAT compatible with wide range Raspberry Pi Fits perfectly with the Raspberry Pi Zero WH Useful LED indicators for troubleshooting and testing Suitable for learning programming and electronics.
Expansion board compatible with the ESP32 Core keyestudio card Designed to expose all keyestudio ESP32 Core board pins as a 2.54mm pin header Embedded DIP switch for power control Powered via DC 7-12V socket
Base board for Raspberry Pi Compute Module 4 Nano A is a mini compute module board Raspberry Pi With x40 GPIOs, you can connect various HAT modules Embeds various ports such as: USB, microSD and MIPI CSI
Connect up to 6 breakout modules (4 x I2C and 2 x SPI) to your Raspberry Pi Pico Numbered board connection ports and M.2.5 mounting holes to secure the board Reverse polarity protection Compatible with most Breakout modules Pimoroni
It is a low power HAT Raspberry Pi, equipped with multiple communication features: GSM, GPRS, GNSS and Bluetooth. It allows your Pi to easily make a phone call, send messages, connect to the Internet wirelessly, global position, transfer data via Bluetooth, and so on. GPS antenna not included.
Want to connect multiple Seeed Studio Grove modules to your Arduino board? TheArduino MKR CONNECTOR CARRIER is the perfect companion to Arduino MKR cards and the Grove ecosystem.
Discover your HDMI Mini Decoder card! So small and so simple, you can use this card as an all-in-one driver for TTL displays, or to decode HDMI / DVI video. This is the contact version! So you can combine it with to a resistive touchscreen! This driver is specifically designed for compact...
Shield card with x4 Grove ports, ideal for simple connections and rapid prototyping Edge connector for easy clipping onto your Micro:bit card Slot for alligator clips and 4 mm banana plugs Integrated USB port for powering your micro:bit
Français
Español
Italiano
Deutsch
