4*8 LED matrix module for micro:bit

€12.90

(Price Tax included)

Out-of-Stock

4x8 LED Matrix Module SK6812
Compatible with micro:bit, just clip your card into the shield
The three primary colors of each pixel can realize 256 levels of brightness display, up to 16777216 types of colors: it is the assurance of brilliant and bright colors!
Embedded x2 3.3V regulators, one powering the micro:bit control board, the second for the 32 LEDs

Get emailed when we have stock again..
Select your combination form the ones in this list.

Enter your email to receive a notification when it becames available

Remember me

Reference :

KS0315

Specifications

Input voltage: DC 5-9V
Total number of LEDs: 32
Brightness: R: 400-500MCD; G: 1000-1500MCD; B: 300-400MCD
Headband: R: 620-625 NM; G: 520-522.5 NM; B: 467.5-470 NM
Intelligent reverse connection protection
SK6812IC control circuit shares a common power supply with the LED light source
The control circuit and RGB chip are integrated into a 5050 package component, forming a complete external control pixel
Integrated signal shaping circuit
Integrated power-on reset and power-off reset circuitry
Serial cascade interface: Capable of completing data reception and decoding via a signal line.
Any two-point transmission distance does not need to add circuitry when the distance does not exceed 5 meters
When the refresh rate is 30 frames/second, the number of cascades is not less than 1024 points
Data transmission speed can reach up to 800 Kbps
Minimum scanning frequency: 400Hz/s