Category: Odroid Accessories

Metal case for ODROID-M1

Ideal case to protect your ODROID-M1 card Delivered in kit form, assemble your own protection Gray metal case Quick and easy to assemble

EU 15V/4A power supply

EU power supply for Odroid H2 / H2+ ; HC-4 and H3 / H3+ (without HDD) AC input 100~240 V DC 15V / 4A output Switching mode power adapter Connector specifications: inner diameter (positive) 2.1mm and outer diameter (negative) 5.5mm Cable length: 100cm

H3/H2 Net Card

ODROID H3 network interface card offers 4 additional 2.5 GbE Ethernet ports Compatible with H2, H2 rev. B, H2+, H3, H3+ When using an H2+ card, you get x6 2.5 GbE Ethernet ports With H2 and H2 rev. B cards, you get 2 x 1 GbE Ethernet ports and x4 x 2.5 GbE Ethernet ports Note: You need...

Speaker kit for ODROID-M1S

Speaker kit with integrated PAM8406 sound amplifier Compatible with ODROID-M1S board Easy connection to 14-pin header connector

SATA power and data cable

Flexible SATA cables are ideal for system builds requiring ODROID-H2 enclosures to connect SATA HDD / SSD storage.

EMMC Linux module for Odroid C4

Increase the storage capacity of your Odroid C4 with these 16 GB, 32 GB, 64 GB eMMC memory modules Ready to use eMMC modules with pre-installed Linux or Android OS Highly efficient 4K resolution access performance Ideal for getting started quickly with your project while enjoying robust...

EMMC module reader card for Odroid

Only way to upgrade your operating system on eMMC ODROID-C0 , ODROID-C1 + , ODROID-C2 , ODROID-C4 , ODROID-H2 , ODROID-H2plus , ODROID-N2 , ODROID-N2plus , ODROID-XU4 , ODROID-XU4Q compatible Caution: Not compatible with 128GB eMMC modules mounted on the Micron eMMC. *The USB multi-drive is not...

EMMC module for Odroid N2 - N2+

Increase the storage capacity of your Odroid N2 or N2+ with these 32 GB, 64 GB, 128 GB eMMC memory modules Ready to use eMMC modules with pre-installed Linux or Android OS Read speed higher than 150 MB/s Sequential write speed over 125 MB/s

5V/2A EU power supply

For ODROID-C1+ / C0 / C2 AC input 100~240 VoltDC output 5Volt / 2AEU compatiblePlug specification: inner diameter (positive) 0.8 mm and outer diameter (negative) 2.5 mm Note: This power supply is not compatible with ODROID-XU4.ODROID C2 / C+ / C0: inner diameter (positive) 0.8 mm and outer...

EMMC module (OS-free) for Odroid...

EMMC storage module without pre-installed OS Boost your Odroid H2/H2+ or H3/H3 with 16 or 64 GB of eMMC memory High performance, up to 250 MB/s read speed and 180 MB/s sequential write speed EMMC interface version 5.0 or higher hS400 interface with 8-bit DDR modepCB revision: 0.4

Case for Odroid C4

To protect the ODROID-C4 card from dust and the elements Material: Strong and durable polycarbonate plastic.

Fan 80x80x10.8mm

Power supply 12V 2A

12V 2A power supply Compatible with Arduino and Odroid (Odroid-C4, Odroid-HC2, Odroid-N2, Odroid-N2plus) 100cm cable Switching mode power adapter

5V 4A EU power supply for Odroid

ODROID cannot be powered by a micro-USB port. So you need this power supply. Features: AC input 100 ~ 240 Volt DC output 5Volt / 4A Switching mode power adapter Compatible with EU Note: This power supply is not compatible with ODROID-C2 / C1 + / C0 / N2 / M1. Compatible with HC1 / MC1 / XU4 / XU4Q

HiFi Shield 2 Audio Card for Odroid

Works with the ODROID-C2 / C1 + but not with the original ODROID-C1. HiFi Shield Plus provides the two stereo RCA connectors for connection to external amplifiers and other audio equipment. Via TI's high-end PCM5242 DAC chip (known as Burr-Brown), it supports 16-, 24-, 32-bit audio formats with...

Case for Odroid N2 and N2+ (Plus)

Official case for Odroid-N2 and Odroid-N2+ (Plus) cards Ideal to protect the card while keeping an easy access to the different ports Strong and resistant polycarbonate case Available in Black or Clear

IR remote control for Odroid

Works with the integrated infrared receiver ODROID-C1 / C0 / C2 Infrared remote control 12-key function 37.9 kHz carrier frequency NEC standard protocol Buttons - Power- Mute- Home- Up (Up Arrow)- Down (Down Arrow)- Left (Left Arrow)- Right (Right Arrow)- OK (Enter)- menu- Back (ESC)- Vol +-...

Gaming case for Odroid XU4

Build your own game console with a powerful XU4 or XU4Q *! - Works with the OGST (ODROID-Game-Station-Turbo) operating system image- 2.4" LCD to show programmable game logo animation- Four convenient front USB ports to connect USB joysticks- Ease of integrating a 2.5" hard drive for your huge ROM...

RTC Shield for Odroid

RTC Shield for ODROID-C2 Simply mount this RTC Shield on the ODROID-C2's GPIO port to keep track of when your ODROID is offline. A lithium battery can keep the RTC chip working for 5 to 6 years without external power. You can still use the official ODROID case with this shield. Features : Size:...

Case for ODROID XU4

Protective case for Odroid XU4 board with pre-cut heat sink or fan. Available in 2 colors (Transparent or black) PolycarbonateSize: 90 x 59 x 28 mmWeight: 32g If you want a more secure lock, you can use screws. There are 2 screw holes on the bottom side.

16 GB Linux or Android eMMC...

Storage card module with pre-installed OS Choice of OS: Linux or Android ready to run Boost your Odroid M1 with this 16GB eMMC memory module High performance, sequential read and write speed is over 165MB/s and 125MB/s

Linux eMMC module for Odroid XU4

Compatible with Linux and XU4 Plug and play with pre-installed Ubuntu and Android software Increase the storage capacity of your XU4 card with these 16 GB / 32 GB eMMC memory modules EMMC version 5.0 card offers faster read and write speeds than an Odroid MicroSD card