Measure temperature, humidity, atmospheric pressure, carbon dioxide (CO2) concentration and volatile organic gas (VOC) concentration with the on-board BME688 sensor Monitor data with integrated mini OLED display Embedded RP2040 chip for data logging Connect to your Raspberry Pi via GPIO...
Designed to simplify the Internet of Intelligent Things (AIoT) by integrating the power of ESP32 Offers reliable Wi-Fi and Bluetooth connectivity x3 Ports Maker, compatible with Qwiic, STEMMA QT and Grove Board preloaded with CircuitPython, also compatible with Arduino IDE, MicroPython...
Isolated relay HAT card Has one two-channel input and one two-channel output Up to 24V DC or 250V AC at 10A Design makes it easy to connect to cards Arduino
Mini base card with x2 Gigabit Ethernet ports 10/100/1000M compatible Designed for all versions of Compute Module 4 Integrated interfaces: x40 GPIO, USB 2.0, microSD card slot useful for CM4 Lite variants (without eMMC) Connectivity that perfectly meets the specific needs of industrial...
CAN RS485 isolated extension HAT 1 CAN channel : MCP2515 controller with CAN transceiver 2 RS485 channels: SC16IS752 and SP3485 dual chip combination Standard 40PIN GPIO header Raspberry Pi
Wideband (100 MHz to 4 GHz) Low Noise Amplifier Modules (LNA) based on SAW bandpass filter Designed to pass between a software defined radio receiver and an antenna and reduce out-of-band intermodulation while providing additional gain for increased sensitivity Compatible with most...
GPS / RTC expansion card with multi-GNSS GPS receiver Featuring PPS output to enable card use on PPS-disciplined NTP servers, and RAW output available from the UBlox™ GPS module Compatible Raspberry Pi (via 2x20 GPIO header) Quick plug-n-play connection and no soldering required
Mini Base-board to add the Raspberry Pi 4 ports to your Raspberry Pi Compute Module 4 Suitable for testing and using the Raspberry Pi CM4 or to be integrated into finished products thanks to its dimensions similar to those of the Raspberry Pi 4 GPIO Header Raspberry Pi 40PIN Color Coded...
Uninterruptible Power Supply (UPS) card to power your Raspberry Pi Compute Module 4 Enjoy stable, uninterrupted power Designed to allow you to work for long hours on your project with long battery life Offers a wide range of connectivity: x40 PIN GPIO, x4 USB, Gigabit Ethernet, x2 HDMI, M.2 M...
2 channel UART to Ethernet converter compatible with Raspberry Pi, Arduino and STM32 Facilitates communication between UART TTL and RJ45 Ethernet, enabling transparent bidirectional data transmission Includes features such as fast data rate, low power consumption and high stability Suitable for...
Microcontroller Raspberry Pi RP2040 integrated on robot controller board Dual channel DC motor driver ideal for robotics Dual-core Arm Cortex-M0+ processor CircuitPython preloading
Solar charger shield card designed to collect solar energy Power management and charging function Input voltage range of 3.0 to 4.5V DC (battery input), and 4.75 to 5.25V DC (USB input) and 4.8 to 5.5V DC (solar input) Includes one micro-USB port and x2 PH2.0 ports
Argon Fan HAT is a simple Raspberry Pi HAT that cools the Pi and gives it a safe shutdown button. With a one-line script, you have all the functionality of the HAT, allowing you to add additional features, such as rebooting the pi processor and adjusting the fan speed of the single board...
I/O board featuring power button, reset button, USB 2.0 host port, 3.5 mm audio output X6 GPIO header pin for I2C and UART Compatible with ODROID-M1S board Simple connection via ODROID-M1S 14-pin header connector
Have a fun and creative learning experience with LEGO® and Raspberry Pi Raspberry Pi Build HAT add-on board with a Raspberry Pi RP2040 microcontroller designed in collaboration with LEGO® Education and compatible with all LEGO® models Raspberry Pi Control up to 4 LEGO® extensions such as...
Li-ion battery charger/switch with dynamic power path management for more stable power supply I2C bus communication, real-time monitoring of voltage, current, power and remaining battery capacity Multi-battery protection circuits: overcharge/discharge protection, overcurrent protection, short...
Suitable for all versions of Raspberry Pi Compute Module 4 PoE alternative to the Raspberry Pi Compute Module 4 IO Board Development Kit Designed to accelerate the time to market for Compute Module 4 based designs Designed for PoE-powered Raspberry Pi projects and many industrial...
Maker for Raspberry Pi Pico ideal for robotics and STEM education Bottom layer of the board with pinout diagram Useful LED indicator for troubleshooting and testing Easy access to all GPIO pins
Designed for Raspberry Pi Pico, ideal for robotic projects Allows Raspberry Pi Pico to drive 4 motors simultaneously or 2 stepper motors 27 I/O pins available to add other devices such as sensors, LEDs, etc. Equippedwith an on/off switch and a power status LED
Educational kit with ATmega328P microcontroller compatible Arduino Designed for learning programming languages 12 integrated LEDs functioning as outputs and indicators Easy connectivity thanks to the label on the pin headers
Expansion board with extended digital and analog ports, designed to connect multiple modules and sensors Multiple interfaces: serial, I2C, SPI, URF, APC220 Includes a reset button and 2 signal indicators You can supply the necessary voltage to your sensor modules via the...
Maker HAT compatible with wide range Raspberry Pi Fits perfectly with the Raspberry Pi Zero WH Useful LED indicators for troubleshooting and testing Suitable for learning programming and electronics.
The latest addition to the "Strompi family" offers completely new application possibilities for Raspberry Pi and many other development boards.In addition to the voltage inputs already available, the new StromPi 3 is now equipped with an optional plug-in battery unit to equip your Raspberry Pi...
It is a low power HAT Raspberry Pi, equipped with multiple communication features: GSM, GPRS, GNSS and Bluetooth. It allows your Pi to easily make a phone call, send messages, connect to the Internet wirelessly, global position, transfer data via Bluetooth, and so on. GPS antenna not included.
Français
Español
Italiano
Deutsch
