USB to DB9 cable 40cm

€3.60

(Price Tax included)

In stock. Delivery within 2 to 5 days.

The CHIPI-X10 is a USB to UART Full Handshake cable at RS232 level with FT231X USB UART and RS232 FT3243S transceiver. It uses a minimum number of components for a basic USB to RS232 converter designed using the FT231XS chip combined with an RS-232 level converter and some capacitors.

Reference :

2352019

Quantity

Poser une question sur ce produit

Chipi-X10 is CE and FCC approved and is one of the simplest solutions for converting from USB to RS232. Using a DB9 connector and being powered by a USB port, the Chipi-X10 converter can be used with FTDI's VCP drivers to provide a COM port on a PC capable of communication rates with RS232 devices from 300baud to 250kBaud. The Chipi - X10 comes with a sculpted white matte plastic case equipped, which covers the electronics inside.

Technical specifications:

Royalty-free VCP and D2XX drivers eliminate the need to develop a USB driver in most cases
UART interface for 7 or 8 data bits, 1 or 2 stop bits and even/odd/mark/space/zero parity
Fully supported hardware or X-On / X-Off software sync
512 byte receive buffer and 512 byte transmit buffer using buffer smoothing technology
Receiver buffer with adjustable time delays
Low USB operating and standby current
Low USB bandwidth consumption
USB 2.0 full speed compatible
Free upward tab
Built-in MTP-ROM to store USB VID, PID, serial number and product description