- A D.I.Y portable video game console dedicated to emulation and retrogaming, inspired by the Gameboy Advance look and available in 2 colors
- Designed as a complete and seamless assembly kit, offering a fun and playful assembly, easily accessible to all
- Processor RockChip RK3326 Quad-Core ARM Cortex A35 - 1.3 GHz with 1GB of DDR3L RAM - 786 Mhz
- Compatible with recent game systems (Playstation, PSP, ..) and emulators like Recalbox
- 3.5" LCD screen, Speakers and 3.5mm jack, Brightness control, Sleep mode, Low power mode for more than 7 hours of autonomy, ...
Attention: microSD card (not provided) of 8 GB or more is required for the installation of an operating system.
Recalbox
The distribution Recalbox distribution has been 100% optimized for this console, so all the features are kept
How to proceed ?
The purchase of a microSD with a minimum capacity of 8GB is necessary to run the Odroid-GO advance.
Buy an SD card.
You will just have to install the image of the operating system like Recalbox on your SD card.
There are several ways to do this. For beginners, we advise you to use Etcher.
Tutorial
This tutorial is in English.
Assembly guide
Find more information on the Odroid wiki.
If you have a problem with your Odroid-GO Advance, you can turn it off with the power button. Press this button for about 6 seconds to turn off your console.
The different emulated platforms :
- Atari 2600
- Atari 5200
- Atari 7800
- Atari Lynx
- SEGA Gamegear
- Nintendo Game Boy
- Nintendo Game Boy Color
- Nintendo Game Boy Advance
- SEGA Master System
- SEGA Megadrive
- Nintendo NES
- Pc Engine
- Pc Engine CD
- Playstation 1
- SEGA CD
- Super Nintendo SNES
- Playstation Portable PSP
- ...
Demo
Characteristics
Processor | Processor: RockChip RK3326 (Quad-Core ARM Cortex-A35 1,3 GHz) GPU: Mali-G31 Dvalin |
|
Memory | 1 GB (DDR3L 786 Mhz, 32-bit bus width) | |
Storage space | SPI Flash (16 MB boot), Micro SD card slot (UHS-1 compatible interface) | |
Display | 3.5-inch TFT LCD 320 × 480 (ILI9488, MIPI interface) | |
audio | Headphone jack, mono 0.5 W 8Ω | |
Battery | Li-Polymer 3.7V / 3000mAh, up to 9 hours of continuous play time | |
DC jack | 5V input, USB-C power connector: USB-C charging cable is included in the package. | |
External I/O | USB 2.0 host x 1, 10-pin port (I2C, GPIO, IRQ at 3.3 volts) | |
Input buttons | F1, F2, F3, F4, F5, F6, A, B, X, Y, directional pad, left shoulder, right shoulder, left shoulder2, right shoulder2, analog joystick | |
Wireless | 2.4Ghz 802.11b / g / n integrated (ESP-WROOM-S2) | |
Power consumption | Game emulation: 300 ~ 550mA (depends on the backlight brightness and the type of game emulations and wireless use) Power off mode: If you disable WiFi, the power consumption will be the same as the previous revision 1.0. |
|
Charging time | 2.5 ~ 3 hours when the device is turned off. When you play the game, it takes 4-5 hours. | |
Dimensions | 155x72x20 mm (6.1 × 2.8 × 0.8 inches), weight: 180 g (6 oz) |
Data sheet
- Category
- Game consoles
- Brand
- Odroid
- Compatibility
- Recalbox 7.2
- Type of storage
- 1GB (DDR3L 786Mhz, bus width 32 Bits)
- Processor (CPU)
- CPU: RockChip RK3326 (Quad-Core ARM Cortex-A35 1.3GHz)
GPU: Mali-G31 Dvalin - USB 2.0 port(s)
- x 1
- GPIO / MPI DSI / MPI CSI port(s)
- 10 pin (I2C, GPIO, IRQ - 3.3V)
- Power supply
- Power consumption: In emulation mode: 250 ~ 500mA (depending on brightness and game type)
In off mode
USB Type-C - Color(s)
- Black
Transparent - Headphone jack
- Jack, 0.5Watt 8Ω Mono
- Assembly required
- Yes
- Type of product
- Cards & Systems
Fabrice A. published the 01/01/2024 following an order made on 12/12/2023
Console, facile à monter, projet intéressant. Je l'ai offert à mes enfants, ils sont ravis. Le son est limite, avec un casque c'est mieux. Le plastique est de fabrication moyenne, à voir dans la durée. Simple et pas chère. Il ya pas mal de jeux, j'aurais aimé trouver plus de ceux connus , avez vous des propositions pour de nouveau jeu? Je valide et je recommande cette console. Fabrice
Roberto F. published the 05/12/2023 following an order made on 16/11/2023
probleme avec la software
Sébastien H. published the 20/09/2023 following an order made on 05/09/2023
Console vraiment très simple à monter, la batterie tiens bien. Polyvalente on peut installer plusieurs os dessus. Je recommande cette console seul peu défaut pour moi le son est vraiment faible même à fond. Vu qu on est dans le DIY vous devriez peut être proposer des kit de personnalisation pour ceux qui aiment modifier leurs appareils.
Alexandre B. published the 08/08/2023 following an order made on 24/07/2023
Conforme
Antonin T. published the 17/07/2023 following an order made on 30/06/2023
Bon produit qui répond pleinement à mes attentes. A voir sur la durée mais RAS pour le moment.
Jonathan J. published the 15/06/2023 following an order made on 04/06/2023
Super petite machine !
Sylvain T. published the 13/01/2023 following an order made on 02/01/2023
Je voulais une petite console que je puisse emmener partout, l'odroid go avance et génial elle tiens très longtemps la batterie, la plus par des pièce sont changable et avec le système recalbox elle est optimisé au petit oignons, je recommande vivement
Nytsee P. published the 13/01/2023 following an order made on 30/12/2022
Mon fils est ravi, il a monté la console seul. Il y a installé ses jeux et BIOS et tout fonctionne super bien
Dominique D. published the 11/12/2022 following an order made on 03/12/2022
C'est un cadeau de noël pour mon fils à voir un peu plus tard
Customers who bought this product also bought:
12 other products in the same category:
Questions (0)
No customer questions for the moment.