Feetech / FITEC 9g Micro Servo
Analog servo with 360 degrees continuous rotation 6 V - 1.5 kg / cm
Ideal for model making and D.I.Y, to create a radio controlled device (helicopters, planes, drones, robots, cars, ...)
Spectral color sensor ideal for creating a compact spectrometer
Compatible with Arduino, STM32, Raspberry Pi and various other platforms
Allows to measure color temperature and identify colors
Dedicated channel to detect ambient light flicker
Maker HAT compatible with wide range Raspberry Pi
Fits perfectly with the Raspberry Pi Zero WH
Useful LED indicators for troubleshooting and testing
Suitable for learning programming and electronics.
Suitable for a wide range of electronic applications requiring a cost-effective high-capacity solution
300 electrolytic capacitors of 10 values
10 values: 10pF, 20pF, 30pF, 47pF, 56pF, 68pF, 100pF, 1nF, 10nF, 100nF
30 pieces of each value
Official fan for Raspberry Pi 4
Fits perfectly to the official case
Designed to maintain an ideal operating temperature for your Raspberry Pi 4 even for high power and overlock use
18mm × 18mm × 10mm heat sink with self-adhesive pad that improves heat transfer from the processor
Motor driver card ideal for mobile robots
Équiped with 4 LED lights and 4 test buttons
Regenerative braking provides better control of motor speed
Compatibility with Arduino and Raspberry Pi and micro:bit controllers
Industrial serial server, LUCKFOX RS485 to RJ45 Ethernet, TCP/IP to serial
Server for converting RS485 signals into RJ45 Ethernet signals
Uses TCP/IP protocol for serial data transmission.
Designed for DIN rail mounting, for easy integration into industrial installations
Power over Ethernet (POE)...
Compatible with port: ATX (compatible with partial BTX type)
PIN number: 24-pin
Switch: Yes
Number of output sets: four sets of different voltage
Size: 12.8 x 4.8 cm / 5.04 x 1.89 "
A very good environmental sensor ideal for indoor monitoring of temperature, pressure and humidity, or even outdoors in a suitable enclosure. It is compatible with Raspberry Pi and Arduino.
If you are an iOS user, there is a Homebridge plugin for the BME280 to allow you to use the sensor for home...
Expansion board compatible with the ESP32 Core keyestudio card
Designed to expose all keyestudio ESP32 Core board pins as a 2.54mm pin header
Embedded DIP switch for power control
Powered via DC 7-12V socket
Detect six distinct channels of visible light with this spectral sensor. Unlike normal RGB color sensors, with the AS7262, you'll get six bands of color readings that roughly translate into red, orange, yellow, green, blue and violet.
The two built-in white LEDs allow you to illuminate materials...
HAT network extension with antennas for Raspberry Pi (GPIO - 40 PIN)
Support for 5G / 4G / 3G networks, Multi-Band / Multimode
Based on Qualcomm Snapdragon X55 platform
SIM card slot, supports 1.8 V / 3 V SIM card
Base board for Raspberry Pi Compute Module 4
Nano A is a mini compute module board Raspberry Pi
With x40 GPIOs, you can connect various HAT modules
Embeds various ports such as: USB, microSD and MIPI CSI
Low Noise Amplifier Modules (LNA) based on SAW bandpass filter
Designed to pass between a software defined radio receiver and an antenna and reduce out-of-band intermodulation while providing additional gain for increased sensitivity
Compatible with most USB SDR dongles such as RTL USB,...
Discreet heat sink and fan keeps the CPU at a stable temperature for optimal performance
2-pin jumper wire for easy connection to your board's CN2 connectors
Fan with thermal pad on the back (to be placed on the metal part of the board)
Compatible with LattePanda V1 board
Connectivity Raspberry Pi, compatible with Raspberry Pi Zero / Zero W / Zero WH / 2B / 3B / 3B + / 4
CAN function, integrated CAN controller MCP2515 via SPI interface, integrated transceiver SN65HVD230
RS485 function, controlled via UART, half-duplex communication, supports automatic TX / RX...
Make your Raspberry Pi 4 seriously cool with Fan SHIM! This seamless, 30mm controllable CPU fan with RGB LED and touch switch will give your Raspberry Pi significantly better thermal performance. It's quiet too!
Note that due to the height of the fan, if you want to use HATs or pHATs with Fan...
Ideal kit for simply extending the capabilities of your Micro:bit
Includes x8 Grove modules (distance, light, gesture sensors, etc.)
Easy connections thanks to the Grove connector, simply plug in modules without cables or soldering!
Micro:bit BB V2 compatible (not included