Français
Español
Italiano
Deutsch
€9.00
(Price Tax included)
This Servo: Lite board for BBC micro: bit can form the control hub for your robotics project, control the first three servos and it has 5 x RGB ZIP LEDs on board.
BBC's Servo: Lite board for micro: bit is a simple board that allows you to easily connect and control low power servos (servos must be able to operate at 3.3V) using the micro:bit micro. It is connected to the micro:bit using five bolts. Connect two servos in standard configuration and it can drive up to 3 servos if the addressable 'ZIP' LEDs are not needed.
It is powered by 3 AAA batteries and also powers the BBC micro:bit, the board has an on/off switch, so when not in use the batteries will not be drained.
The board also features 5 individually addressable RGB LEDs (NeoPixel compatible) and additional external ZIP LEDs can be connected to the board if required.
Features:
Connect two servos in standard configuration and can drive up to 3 servos if 'ZIP' addressable LEDs are not required.
Powered by 3 AAA batteries which also power the BBC microbit (not included).
ON / OFF button.
5 individually addressable RGB LEDs (NeoPixel compatible). Additional external ZIP LEDs can be connected to the board.
Contents:
1 x Servo: Lite board with pre-equipped battery holder.
5 x M3x8 Countersunk Pozi steel screws.
1 x Perspex spacer.
Dimensions:
- Length: 55mm.
- Width: 52mm.
- Height: 17mm.
Requires :
- 3 x AAA batteries.
- 1 x microbit BBC.
- Servos
- Screwdriver.
K-SERVO
22 Items
Data sheet
- Category
- Servo-motors & motors
- Compatibility
- Micro:bit
- Type of product
- Robotics
Comments (0)
No customer reviews for the moment.
Customers who bought this product also bought:
Questions (0)
No customer questions for the moment.
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
This Servo: Lite board for BBC micro: bit can form the control hub for your robotics project, control the first three servos and it has 5 x RGB ZIP LEDs on board.
BBC's Servo: Lite board for micro: bit is a simple board that allows you to easily connect and control low power servos (servos must be able to operate at 3.3V) using the micro:bit micro. It is connected to the micro:bit using five bolts. Connect two servos in standard configuration and it can drive up to 3 servos if the addressable 'ZIP' LEDs are not needed.
It is powered by 3 AAA batteries and also powers the BBC micro:bit, the board has an on/off switch, so when not in use the batteries will not be drained.