ODROID-N2L card

Features

• Amlogic S922X (12nm) processor: Quad-core Cortex-A73 (2.2GHz) and dual-core Cortex-A53 (2GHz)

• ARMv8-A architecture with Neon and Crypto extensions

• Mali-G52 GPU with 6 execution engines (800 Mhz)

• 2GB or 4GB LPDDR4 memory with 32-bit bus width

• Memory data rate: 3216 MT/s

• Low memory power design: 1.1 Volt

• EMMC connector (up to 128GB)

• MicroSD slot (DS/HS modes up to UHS-I SDR104)

• HDMI 2.0* (up to 4K @ 60Hz with HDR, CEC, EDID) / maximum 50mA current from +5V power pin

• HDMI digital audio output

• USB 3.0 host port

• USB 2.0 host port

• MIPI DSI 4-way (TBD)

• 40-pin GPIO connector (2.54mm pitch)

• SPI

• UART

• x2 I2C

• x2 ADC inputs (10bit, 1.8V Max)

• All I/O signal level is 3.3 volts except for ADC input at 1.8 volts max

• Optional USB Wi-Fi or Ethernet adapter

• Operating voltage: 7.5V ~ 16V Input range: outer diameter (negative) 5.5mm, inner diameter (positive) 2.1mm

• 12 V/2 A power supply recommended

• Power consumption in off mode: 0.2 Watt

• Standby power consumption: 1.5 watts

• CPU stress power consumption with passive heatsink: 5.4 W at 2.208/1.908 MHz; 5.8 W when overclocked to 2.400/2.016 MHz

• CPU stress power consumption with active cooling: 6.1W @ 2.208/1908 MHz; 6.4W when overclocked

• Dimensions with fan heatsink: 69 mm x 56 mm x 22 mm

• Weight: 50 g

* Although the 5V power pin is capable of delivering a minimum of 300mA of current (per HDMI 2.0 specification) on pins 17 and 18, the N2L has an internal regulator that cannot exceed 50mA of current.

Diagram

Useful resources

Images

As the DRAM chip has changed from DDR4 to LPDDR4, the existing operating system image for the N2/N2+ boards cannot be booted on the N2L versions!
The following operating system images are available for the N2L board:

- Android 9.0 64bit and 32bit
- Ubuntu 22.04 Mate / Minimal with kernel 4.9
- Ubuntu 22.04 Desktop with Kernel 5.15 and Upstream
- EmuELEC

See the images

Android and Linux eMMC modules available soon on the store.

Odroid Wiki