Vittascience solar oven kit

€159.00

(Price Tax included)

Last items in stock

Discover the power of the sun's rays with this Connected Solar Oven to build!
Reach temperatures up to 150°C and measure the temperature inside and outside the oven but also visible light, ultraviolet and infrared
Ideal to discover the Arduino UNO, Micro:bit V2, and even Raspberry Pi boards with the basic version
Includes a detailed guide in French for an easy and fun assembly

You can't find your VITTASCIENCE version? Ask about it!

Get emailed when we have stock again..
Create an alert for this combination

Kit with Arduino

Enter your email to receive a notification when it becames available

Remember me

Version: Basic kit

Basic kit
Kit with Micro:bit
Kit with Arduino

Reference :

VIT-FOURSOLAIRE

Quantity

Poser une question sur ce produit

Solar oven available in 3 versions: basic version, Arduino and Micro:bit !

	Basic version	Version Arduino	Micro:bit version
Card included	None - ideal if you already have a card Raspberry Pi, Arduino, Micro:bit and sensors,...	Card Arduino REV3	Card Micro:bit V2
Contents	Oven part to assemble: Plaser-cut poplar wood rings Reflector sheet to cut out Polycarbonate glass Self-adhesive reflective film for the interior of the oven Self-adhesive gasket, scissors, tape	Oven part to assemble: Plaser-cut poplar wood rings Reflector sheet to cut out Polycarbonate glass Self-adhesive reflective film for the interior of the oven Self-adhesive gasket, scissors, tape Electronic part : SI1145 and high temperature sensors with grove connectors, Grove shield, LCD screen, MicroSD card with openlog module for data recording USB cable, Battery and adapter for 9V battery, Assembly booklet	Oven part to assemble: Plaser-cut poplar wood rings Reflector sheet to cut out Polycarbonate glass Self-adhesive reflective film for the interior of the oven Self-adhesive gasket, scissors, tape Electronic part : SI1145 and high temperature sensors with grove connectors, Grove shield, LCD screen, MicroSD card with openlog module for data recording USB cable, Battery and adapter for 9V battery, Assembly booklet
Compatibility	Raspberry Pi, Micro:bit, Arduino UNO and Nano QuickPi, STM32 NUCLEI-WB55RG and NUCLEO-WL55	Arduino UNO and Nano	Micro:bit

Using the oven

Before using this solar oven, make sure that the weather forecast is for a sunny day, and use the oven at the sun's zenith (i.e. at noon). With the horizon, the angle of the glass is 45°, which is ideal for use in spring and fall in the metropolitan area. Depending on the season, the sun rises more or less high. The angle of the sun with the horizon can be calculated with this calculator. For example, for a use in winter with an angle of the sun with the horizon of 25°, you will have to raise the two back legs of the oven of 20° (=45-25) so that the glass of the oven is placed at the perpendicular with regard to the rays of the sun. In summer, you will need to raise the front legs. The oven will reach its maximum temperature after about 30 minutes.

Solar calculator

Caution: Maximum precautions to be taken during use: do not touch the black container plate, and avoid opening the door to limit heat loss.

Useful resources

Discover the Micro:bit card

Discover the card Arduino

Display text on an LCD screen with Arduino

Measuring visible, UV and IR light levels with the SI1145 sensor with Micro:bit

Reference VIT-FS-BASE

In stock 2 Items

Data sheet

Category: Microcontrollers
Brand: Vittascience
Compatibility: Arduino*~Micro:bit*~Raspberry Pi
Assembly required: Yes
Complete kit: Yes
Theme: Raspberry Pi*~Beginners & fun projects*~Programming & Coding*~Arduino*~Electronics*~Micro:bit
Type of product: Kits & packs