Category: Accessories

Extension cable RJ45 1.5m

Use this compact 1.5m long RJ45 extension cable to connect your Raspberry Pi to the Internet via cable.

PAA5100JE near optical flow SPI...

Breakout navigation module ideal for surface detection and floor tracking of a robot vacuum cleaner PAA5100JE sensor that uses a low-resolution camera and intelligent algorithms to detect surface movement Very narrow range of 15 to 35 mm, suitable for use with a wide variety of different...

Raspberry pi A+ case with fan slot

Breadboard Pibow

This plate allows you to realize your projects. It is a great support for your prototypes, and allows you to fix a Pibow cut box. You will have the possibility to put either a board with 400 stitches or two small boards of 170 stitches.

Protection for Raspberry Pi 3

This protection for Raspberry Pi is not quite a complete case but it allows to protect your RPi while keeping its thinness. The protection is composed of two acrylic pieces that are fixed with 4 screws. This protection allows you to have access to all the connectors of your Raspberry Pi!

VESA Slice 200mm mount

The VESA Slice mount is designed to be fully user customizable and adaptable to meet any requirement. The streamlined look and adaptability make it perfect for many applications including: digital signage, industrial protection, trade show and children's media centers, classroom education,...

Bluetooth LE Development Board

Bluetooth LE development board designed for IoT and AI applications Rich interface: 1x reset button, 1x UART, 1x IIC, 1x SPI, 1x NFC, 1x SWD, 11x GPIO, 6x ADC, 1x three-in-one LED, 1x user LED Embedded microphone, embedded antenna and 6 Dof IMU Can be programmed with Arduino, MicroPython,...

Microstack GPS - L80 GPS module...

Harness the power of satellites to know exactly where you are in the world, wirelessly synchronize your time with the precision of an atomic clock!

RPi IR-CUT camera

Camera module Raspberry Pi, IR-CUT integrated, supports night vision, type B. Built-in removable IR-CUT filter, eliminates color distortion in daylight Comes with infrared LED, supports night vision 5 megapixel OV5647 sensor Adjustable focus distance CCD size: 1/4 inch Aperture (F): 1.2 Focal...

4.3" e-paper 800x600 screen

It is a serial interface E-paper display module, 4.3 inches, 800 × 600 resolution, with integrated font libraries, ultra low power consumption.

OmniVESA mount for RPi

This mount for Raspberry Pi works with or without a Pibow case (attention, case not included!) and allows you to hang your Pi on different supports.

Pi-motion AI camera platform for...

This AI Pi-motion camera is perfect for AI beginners and fans of Raspberry Pi. It is based on Raspberry Pi, equipped with a multi-functional expansion board, high quality metal servo and a beautiful wear-resistant aluminum alloy form. For this product, we use Python programming language and...

Cigar lighter charger USB fast...

Dual port cigarette lighter charger: USB-A (30W max) and USB-C (30W max) for simultaneous charging of two devices (25W) Compatible with several fast charging protocols Equipped with multiple protections against overcurrent, short circuit,... Improved aluminum alloy shell for internal heat...

Battery holder 5 x AA

Increase the power of your projects using this battery holder capable of supplying 7.5V for conventional batteries and 6v for rechargeable batteries. The holder is terminated with bare wires so it can be directly soldered or connected to a screw terminal.

Motor driver for Raspberry Pi Pico

Motor driver for Raspberry Pi Pico, ideal for buggy projects Allows Raspberry Pi Pico to drive two motors simultaneously or a single stepper motor Includes DRV8833 motor driver IC with short circuit, overcurrent and heat protection Éequipped with an on/off switch and a power status LED

Multilayer ceramic capacitor

The MC0805B104K500A2.54MM is a multi-layer ceramic capacitor with radial outputs for general purpose applications, with X7R dielectric and 50V voltage rating. Chip size 0805

DotStar White LED Strip

A very attractive strip light The new DotStar light strip has an outstanding performance and offers a very aesthetic white light rendering. Thanks to the use of generic SPI wires, data transmission is much faster and does not require any special synchronization. These flexible strips are 1 meter...

Cooling tower for Raspberry

Get to know this ICE Tower CPU cooling fan for Raspberry Pi! Tower structure, 5mm copper tube, multi-layer heat sinks, powerful 7-blade fan, all the above combinations make this product a great radiator for Raspberry Pi  In the case of overclocking, it can reduce the temperature of Raspberry...

Real time clock DS3231

High precision RTC compatible Raspberry Pi and Arduino High precision RTC manages all timing functions Temperature sensor juxtaposed to the crystal Ideal for data logging and clocks

Dual Expander card for Raspberry...

GPIO expansion card to connect up to 2 additional expansion modules Designed specifically for the Raspberry Pi Pico Standard socket for mounting the Raspberry Pi Pico (via solder or jumper wire) Clear and easy to use pinout labels

Pico Proto prototyping stage

Prototyping board with 6x20 holes spaced 2.54 mm apart (120 of which 40 are for attachment to the Pico) Designed specifically for the Raspberry Pi Pico Soldering on the male headers of Raspberry Pi Pico or on female headers Dimensions perfectly adapted to the Pico for more finesse

Adjustable screen mount

Designed to accommodate a TFT screen up to : - 7" for the small format - 10'' for the large format Convenient to accommodate an HDMI screen connected to a PI.

16GB SanDisk Micro-SD card with...

16GB SanDisk micro-SD card, Class 10/U1 with pre-integrated Noobs software (sold without adapter) Perfect for users of Raspberry Pi Ultra-high transfer speed of up to 80 MB/s Interface: SDA 3.0 UHS; default format: exFAT

Audio Cable 3.5MM ST To 2X 1.8M

3.5mm audio cable 1.8m.