A fast and accurate environmental sensor that can measure temperature, pressure and altitude. If you're looking for a simple temperature and pressure sensor, then this is the one to choose.Accurate (± 1 hPa, ± 1.0 ° C, ± 1 meter), and ideal for keeping track of temperatures around your home or...
Very handy little kit designed to be used with your Arduino. It contains everything needed for a first use with a Arduino, it includes many of the most popular accessories for electronic projects. Breadboard, jumper, color LEDs, resistors, buzzer, etc., all come in their own convenient box for...
This sophisticated optical flow sensor detects the movement of surfaces in front of it, from ~ 80 mm to infinity! The PMW3901 is a clever little sensor that uses a low-resolution camera and smart algorithms to detect the motion of surfaces. A great use for this is to detect and correct the drift...
An RGBW-lit, clickable switch card, perfect for adding navigation or control to your projects Raspberry Pi or Arduino.
Composed of 2 rows of 20 Pin is 40 PIN in total. This GPIO cable is 150 mm long. It allows you to connect your new Rapberry Pi B+ Ideal for programming, dialoguing with a breadboard, sending and receiving data. Not compatible with Model B and A
Add a tracker to your Raspberry For an optimal use of your Raspberry Pi, you can install a tracking module. This infrared reflection sensor can be used for: electricity meter, paper detection in printer, barrier detection, black and white line detection..
It is a module integrating two 8x8 matrix screens, allowing the display of letters, expressions, patterns, configurable with alligator clips or with jumpers. This module is also Lego compatible and can perfectly integrate a complete robotic structure.
The power module is specially designed for the Raspberry Pi 3 Model B, allowing the motherboard to run offline for up to 9 hours. It's not just a power supply for Raspberry Pi; this board has 2 USB Type A ports - one provides power for the Raspberry Pi and the other for the built-in LCD.The...
Need large LED indicators? Here are the 10mm diffuse tint LEDs. They are bright enough to be seen in the daytime, and from all angles. They easily fit in a breadbord. diameter 10mmwavelength 565 nm2.2-2.5V voltage, current 20mA1000 mcd typical brightness
Increase the capabilities of your Raspberry Pi The original Raspberry Pi has only one UART port with 1 channel. With this serial extension, you have a UART with two channels as well as 8 GPIOs programmable via I2C. The LEDs integrated in the extension allow you to monitor the UART operating status.
Français
Español
Italiano
Deutsch
