Mini mechanical keyboard kit with 16 clickable keys (4x4) for self-assembly (no soldering)
Low-latency input and high reliability with the RP2040 microcontroller Raspberry Pi
Equipped with Kailh Speed switches and intelligent transparent DSA keys with fully customizable RGB lighting...
Li-ion battery charger/switch with dynamic power path management for more stable power supply
I2C bus communication, real-time monitoring of voltage, current, power and remaining battery capacity
Multi-battery protection circuits: overcharge/discharge protection, overcurrent protection, short...
2 channel UART to Ethernet converter compatible with Raspberry Pi, Arduino and STM32
Facilitates communication between UART TTL and RJ45 Ethernet, enabling transparent bidirectional data transmission
Includes features such as fast data rate, low power consumption and high stability
Suitable for...
Place this sensor on your finger to know your heart rate!
Embeds an ultra-bright infrared LED and a phototransistor to detect the pulse
Shine the bright LED on one side of your finger while the phototransistor on the other side detects the amount of light transmitted
The red LED will flash...
The BME680 sensor allows you to measure temperature, pressure, humidity and indoor air quality, and is compatible with Raspberry Pi and Arduino!
You can use it to monitor all aspects of your indoor environment. Its gas resistances will react to changes in volatile organic compounds and can be...
LONGRUNNER stepper motor with standard interface and servo motor included
Compatible with 2560, 1280 DSP, STM32, Raspberry Pi and Arduino IDE LK67
4-phase LED A, B, C, D indicates the operating status of the stepper motor.
Pull-up torque: > 34.3 mN.m (120 Hz); Unwind torque: > 34.3...
Solar charger shield card designed to collect solar energy
Power management and charging function
Input voltage range of 3.0 to 4.5V DC (battery input), and 4.75 to 5.25V DC (USB input) and 4.8 to 5.5V DC (solar input)
Includes one micro-USB port and x2 PH2.0 ports
868/915 MHz filtered preamp for FLARM/LoRa/ISM/Helium
Designed to pass between a software defined radio receiver and an antenna and reduce out of band intermodulation
Self-switching transmission bypass
Excellent receiver performance gains
Maker for Raspberry Pi Pico ideal for robotics and STEM education
Bottom layer of the board with pinout diagram
Useful LED indicator for troubleshooting and testing
Easy access to all GPIO pins
Designed for Raspberry Pi Pico, ideal for robotic projects
Allows Raspberry Pi Pico to drive 4 motors simultaneously or 2 stepper motors
27 I/O pins available to add other devices such as sensors, LEDs, etc.
Equippedwith an on/off switch and a power status LED
Switching power supply AC 100-240V to DC 5V 5A 60W anti-interference and high reliability
Wide input voltage range (100-240V) in accordance with the worldwide operating standards
Good insulation performance and high electrical resistance
85% efficiency
Suitable for all versions of Raspberry Pi Compute Module 4
PoE alternative to the Raspberry Pi Compute Module 4 IO Board Development Kit
Designed to accelerate the time to market for Compute Module 4 based designs
Designed for PoE-powered Raspberry Pi projects and many industrial...
Expansion board with extended digital and analog ports, designed to connect multiple modules and sensors
Multiple interfaces: serial, I2C, SPI, URF, APC220
Includes a reset button and 2 signal indicators
You can supply the necessary voltage to your sensor modules via the terminal blocks
Allows precise adjustment of output voltage and current over a wide input voltage range of 0 to 40V and an adjustable output voltage of 1.25V-37V
Efficiency up to 92% andmaximum output current up to 3A
Integrated LCD display
Clip-on connectors for 9V batteries
Made of solid plastic and metal
Ideal for easily replacing a faulty battery contact connector on your electronic device without stripping the wire
Pack of 8 pieces
It's perfect for integrating into projects - industrial, scientific or just plain fun - and much more affordable than most thermal imaging cameras. Our distribution makes it easy to use the camera with your Raspberry Pi or Arduino, using an I2C and 3-6V power supply. And it's available in two...
Argon Fan HAT is a simple Raspberry Pi HAT that cools the Pi and gives it a safe shutdown button. With a one-line script, you have all the functionality of the HAT, allowing you to add additional features, such as rebooting the pi processor and adjusting the fan speed of the single board...
I/O board featuring power button, reset button, USB 2.0 host port, 3.5 mm audio output
X6 GPIO header pin for I2C and UART
Compatible with ODROID-M1S board
Simple connection via ODROID-M1S 14-pin header connector
Educational kit with ATmega328P microcontroller compatible Arduino
Designed for learning programming languages
12 integrated LEDs functioning as outputs and indicators
Easy connectivity thanks to the label on the pin headers
Dual GPIO connection board, x20 horizontal and x20 vertical
Connecting your peripherals horizontally and/or vertically has never been easier!
For quick and easy use of extended peripherals
Compatible with ODROID-N2, -C4 and -M1 boards
Allows precise adjustment of output voltage and current over a wide input voltage range from 6V to 40V and converting 24V to 12V
Efficiency up to 96% and measured at 20A
Stable and reliable
Quality and durable finish