HDMI to DVI cable
Black HDMI male to DVI male cable Suitable for Raspberry Pi 3 and earlier versions Available in 2 lengths: 1M and 1.5M
Black HDMI male to DVI male cable Suitable for Raspberry Pi 3 and earlier versions Available in 2 lengths: 1M and 1.5M
AC - E.U power supply with 3 USB ports 5V - 2.4 A Multi-protection chip for security Total output of 3.4 A Apple protocol support 2.4 A
SSD mSATA III KingSpec MLC / flash NAND Read speed: up to 520Mb/s Write speed: up to 400Mb/s Available in 3 versions: 64GB, 128GB, 256GB
High quality USB Double sided 90° to Micro USB cable from Remax ideal for data transfer and charging.
Coupled with a power adapter, you can use this 1.8m USB cable with micro-USB output to power your micro-USB output to power your Raspberry Pi.
The PiJuice 12 watt solar panel is the perfect way to charge and/or power your PiJuice HAT and your Raspberry Pi for free when you are in a sunny place thanks to the revolutionary PiAnywhere technology! This solar panel exists in 4 versions, 6W, 12W, 22W, 40W
If you need to connect a DC power supply to a board that doesn't have a DC Jack port, this adapter will come in handy! There is a 2.1mm DC jack on one end, and a screw terminal on the other. The terminals are marked with positive/negative signs.
Use this compact 1.5m long RJ45 extension cable to connect your Raspberry Pi to the Internet via cable.
The four batteries are connected in series, for a nominal power of 6V DC. - ON/OFF switch to control the power supply - Battery type: AA- Includes a removable sliding cover- 12.70 cm tinned wire and square configuration
Dual port cigarette lighter charger: USB-A (30W max) and USB-C (30W max) for simultaneous charging of two devices (25W) Compatible with several fast charging protocols Equipped with multiple protections against overcurrent, short circuit,... Improved aluminum alloy shell for internal heat...
Increase the power of your projects using this battery holder capable of supplying 7.5V for conventional batteries and 6v for rechargeable batteries. The holder is terminated with bare wires so it can be directly soldered or connected to a screw terminal.
25cm Micro USB cable NOTE: This cable is not compatible with data transfer
16GB SanDisk micro-SD card, Class 10/U1 with pre-integrated Noobs software (sold without adapter) Perfect for users of Raspberry Pi Ultra-high transfer speed of up to 80 MB/s Interface: SDA 3.0 UHS; default format: exFAT
A high quality and reliable power supply to convert mains power to 3A, 5.1V power using a USB-C type connector. With a power rating of 15.3W, this power supply comes with four AC adapters. Comes with 4 plugs: UK/EURO/USA/AUS
Universal, the official 5V 2.5A micro USB power supply for Raspberry Pi has been specifically designed to take full advantage of the improved power management on the Raspberry Pi 3 board.
High capacity 3.7V lithium-ion battery with short circuit protection JST-PH connector 100mm cable Available in 4 versions: 3350 mAh, 6700 mAh, 10,050 mAh, 13,400 mAh