5V and 3.3V power supply module, choice is made via slide switch Has two independent control channels, powered by USB Input voltage DC 7-12V or via USB (5V) Compact design, ideal for saving space on your experiment board
PiJuice: a fully uninterrupted power supply that will always keep your Raspberry Pi powered. The on-board real-time clock (RTC) will let your Pi know what time it is, even without a power supply or Internet connection. At the same time, an integrated microcontroller chip (MCU) handles soft...
MicroSD preloaded with the operating system Raspberry Pi OS, MicroSD 128GB: Class 10, V30, U3, Grade A1, MicroSD 64GB: Class 10, V30, U3, Grade A1, MicroSD 32GB: Class 10, V10, U1, Grade A1.
Compatible with Raspberry Pi B, B+, Pi 2 and Pi 3 Ideal for powering and transferring your data over a single Ethernet cable 5V 2.4A isolated PoE splitter MicroUSB with IEEE 802.3af standard
The Micro HDMI Male to HDMI Female Adapter lets you stream audio and video content from a camera, laptop or older tablet with a Micro HDMI port to your HDTV or projector with a standard HDMI port. It lets you play games on a larger TV screen or share high-definition video and digital audio with...
Mini USB type A to micro-USB type B cable Designed for data transfer and power and Micro:bit compatible Available in black or white Length of 25 cm
Black HDMI male to HDMI male 2.0 High speed cable Ideal for wiring your LED/OLED/QLED 4K HDR Ethernet TV Available in 2 lengths: 3M, 5M
This device is ideal for turning on and off your Raspberry Pi 4 or other USB-C powered single board computer. You can use your existing power adapters and cables as long as they can generate adequate current. Length: 27cm
1m shielded RJ45/LAN CAT6 extension cable with SSTP certification Stable bandwidth up to 250 MHz Copper conductors and gold-plated connectors Up to 1000 MBps transfer speed
This micro HDMI to HDMI plug is really useful if you already have an HDMI to HDMI cable to use. It's a great way to convert any micro HDMI plug into a regular HDMI plug and ... that's about it! Now you can use any of your regular HDMI cables.
SanDisk SDXC Class 10 UHS-1 Micro-SD card Up to 100MB/s transfer speed to allow you to move up to 1,200 photos in one minute Perfectly suited for Raspberry Pi and all other products like Android smartphones and tablets Available in 6 versions: 16 GB, 32 GB, 64 GB, 128 GB, 256 GB, 400 GB
AAA battery holder (x2) with switch Designed specifically for use with the Micro: bit Connection cable JST-PH
For ODROID-C1+ / C0 / C2 AC input 100~240 VoltDC output 5Volt / 2AEU compatiblePlug specification: inner diameter (positive) 0.8 mm and outer diameter (negative) 2.5 mm Note: This power supply is not compatible with ODROID-XU4.ODROID C2 / C+ / C0: inner diameter (positive) 0.8 mm and outer...
12V 2A power supply Compatible with Arduino and Odroid (Odroid-C4, Odroid-HC2, Odroid-N2, Odroid-N2plus) 100cm cable Switching mode power adapter
Ideal for improving the efficiency and speed of read/write transfer rates of Compute Module 4 Multi PCI-E compatible (PCI-E × 1 / × 4 / × 8 / × 16) Compatible with various sizes of M.2* SSDs (2230, 2242, 2260, 2280) On-board Operation LED indicator: Power on; read / write *SDD holding screws...
Charging station for efficient charging of your controllers LED charge indicator and overcharge protection Storage space for your Switch game cards With the Famicom design, find the charm of the red and white Japanese console!
High capacity 20,000 mAh power bank 2 types of power inputs / recharge the battery via micro-USB and USB Type-C 2 types of power outputs / power your device via USB-A and USB Type-C Quick Charge Power Delivery 3.0 and Quick Charge 4.0 (22.5W)
18650 battery charger with2 x 5V 1A/2.1A USB outputs Motherboard equipped with overcharge, discharge and overcurrent protection Automatic charge stop to prevent overcharging of devices Equipped with an intelligent digital display screen
Official 48W white power supply for Raspberry Pi Build HAT 3 in 1 power supply for your projects: Power your Raspberry Pi Build HAT, your Raspberry Pi board and your LEGO® Technic motors Create creative projects by combining all the technical capabilities of Raspberry Pi with the LEGO®...
ODROID cannot be powered by a micro-USB port. So you need this power supply. Features: AC input 100 ~ 240 Volt DC output 5Volt / 4A Switching mode power adapter Compatible with EU Note: This power supply is not compatible with ODROID-C2 / C1 + / C0 / N2 / M1. Compatible with HC1 / MC1 / XU4 / XU4Q
It is a 12-port USB power adapter that can charge up to 12 digital devices at the same time. It can ensure safe charging as it offers protection against overheating, current overload and short circuit. Different USB ports from 1.5A to 3.5A can meet your different requirements. The strong...
Français
Español
Italiano
Deutsch
